|
|
PRODUCT CLASSIFICATION FOR HAZARDOUS MATERIALS
Note: Product information may be found in the CFR Section 172.101
The following product information is to be used as a guide to determine the proper shipping container for your product.
1.) Hazardous materials description and proper shipping name(s):
(Column 2 of the HazMat table in CFR section 172.101) _________________________
2.) Packaging Group for your product (I, II, III):
(Column 5 of the HazMat table) _________________________
HazMat/Flammable Liquids Table: |
X VERY HAZARDOUS |
Flash Point (Less Than) --- |
Boiling Point (Less Than) 95 F |
Pkg Group I |
Y MODERATELY HAZARDOUS |
Flash Point (Less Than) 73 F |
Boiling Point (Greater Than) 95 F |
Pkg Group II |
Z MINOR HAZARD |
Flash Point (Less Than) 73 F - 141 F |
Boiling Point (Greater Than) 95 F |
Pkg Group III |
3.) Specific Gravity of product: _________________________
(Relative Density equals Specific Gravity. Weight of one gallon of product divided by weight of one gallon of water [8.34] = Specific Gravity.)
4.) Vapor Pressure of your product in Kpa at 55 C: _________________________
  A) Vapor Pressure is required for liquids.
  B) A 250 Kpa minimum test pressure is required for all packaging Group I Products.
  C) Air Shipments of Packaging Group II, or III require a minimum Kpa rating of 100.
  D) Vapor pressure may be listed in many forms: atm, mmGH, Torr, or PSI. If you can provide us with any measurement and at what temperature we will convert it to Kpa at 55 C.
  Pressure: ATM________ mmHG ________ Torr ________ PSI ________
  Temperature: ________ C ________F
5.) For Solids - What is the weight of your product in kilograms:_____________________
  Conversion Formula: Total weight of package in pounds / 2.2046 = kilograms
UN EMBOSSMENT
Example of UN marking for LIQUID hazardous materials : UN/1A2/Y1.5/150/96/USA/SDCC
UN = United Nations
1 = drum
A = steel
2 = open head (1 = tight head)
Y= class or packing group tested at
X = most hazardous (group I, II, III)
Y = medium hazard (group II, III)
Z = least hazard (group III)
1.5 = relative density (specific gravity)
150 = Kpa (kilopascal) or pressure tested at; indicates maximum specific gravity allowable for this packaging
96 = year of manufacture
USA = country of manufacture
SDCC = manufacturer's UN registered mark
*Liquids certified drums may be used as a primary container for solids
Example of UN marking for SOLID hazardous materials:
UN/1A2/X150/S
UN/1A2/X = see above
150 = weight capacity tested in kg (kilograms)
S = tested for solids
*Solids certified drums may not be used as a primary container for liquids
|
|
|
|
|
|